Ender 3 Bed Temperature With Glass. The bed registers 5c lower than i tell it to be, and it takes quite long to disperse. It’s easy to remove and clean the bed in your sink. on the pla+ box, the bed temperature should be 70/80°c. my heated bed looks completely flat too despite of many uneven ender 3 heated beds around. You can also wipe it off with cleaning alcohol on the side you’re going to print on for a perfect finish. i have a laser heat thermometer. ender 3 pro full guide on glass bed installation and print bed levelingin. i use the glass bed, and i set the bed temperature to 75°c, and the maximum suggested by my filament is 80°c. I tried printing at 75°c but it instantly cools down and it doesn't stick. another advantage of glass is that it conducts heat very well, so the bed gets up to temperature quicker and has better heat distribution. chuck tests out a glass bed for the creality ender 3 to see how well it works.
from www.reddit.com
chuck tests out a glass bed for the creality ender 3 to see how well it works. another advantage of glass is that it conducts heat very well, so the bed gets up to temperature quicker and has better heat distribution. ender 3 pro full guide on glass bed installation and print bed levelingin. i have a laser heat thermometer. my heated bed looks completely flat too despite of many uneven ender 3 heated beds around. on the pla+ box, the bed temperature should be 70/80°c. It’s easy to remove and clean the bed in your sink. You can also wipe it off with cleaning alcohol on the side you’re going to print on for a perfect finish. The bed registers 5c lower than i tell it to be, and it takes quite long to disperse. I tried printing at 75°c but it instantly cools down and it doesn't stick.
Anyone have an stl for cr6 se style glass bed clips that I can mount on
Ender 3 Bed Temperature With Glass chuck tests out a glass bed for the creality ender 3 to see how well it works. on the pla+ box, the bed temperature should be 70/80°c. i use the glass bed, and i set the bed temperature to 75°c, and the maximum suggested by my filament is 80°c. i have a laser heat thermometer. The bed registers 5c lower than i tell it to be, and it takes quite long to disperse. ender 3 pro full guide on glass bed installation and print bed levelingin. You can also wipe it off with cleaning alcohol on the side you’re going to print on for a perfect finish. It’s easy to remove and clean the bed in your sink. I tried printing at 75°c but it instantly cools down and it doesn't stick. another advantage of glass is that it conducts heat very well, so the bed gets up to temperature quicker and has better heat distribution. chuck tests out a glass bed for the creality ender 3 to see how well it works. my heated bed looks completely flat too despite of many uneven ender 3 heated beds around.
